Influence of Surface Conditions on Surface Temperature
Geotechnical engineers working in areas of discontinuous permafrost are frequently faced with the necessity of designing facilities with a minimum of thermal disturbance. Construction...
Pipeline Frost Heave Predictions Using a 2-D Thermal Model
Chilled structures founded on initially unfrozen soils cause a zone or 'bulb' of frost to develop with time. This time period may be of seasonal duration, as...
Soil Nailing a Wall
Soil nailing is the reinforced-earth idea (in which the earth must be backfilled behind the wall) applied to cut situations. Soil nails are an inexpensive post-tensioned tieback, consisting...
Arctic Offshore Site Investigations
The continuing search for new petroleum sources has led to increased exploration activity in the arctic offshore regions of Alaska. The general approach to site investigations has been...
A Critique of Arctic Marine Site Investigation Techniques
Arctic marine site investigations have evolved from the need by oil companies to operate in offshore areas beyond the ice shear zone. An overview of the site investigation organization...
Electrical Resistivity Techniques for Offshore Arctic Geotechnical Engineering Applications
The electrical resistivity of an arctic marine soil depends on the porosity, pore water salinity, grain size and shape, clay content, and degree of ice-bonding of the soil. Therefore,...
Geotechnical Thermal Analysis with a Microcomputer
A computer program entitled TDHC (Two-Dimensional Heat Conduction), based on finite element modelling, is capable of solving two-dimensional nonsteady-state heat conduction problems. These...
Geotechnical Design of Caisson Islands
There are a number of areas where fundamental geotechnical research is required so that non-conservative, rational and safe design of artificial exploration islands can be achieved. Some...
Computer Modeling of Roof Support
The Bureau of Mines is using a full-scale geotechnical model of a 15-foot-wide (4. 6-m) coal mine entry in correlation with computer finite-element analysis at its Spokane Research Center...
Probability of Stability Design of Open Pit Slopes
Uncertainty and risk have always been associated with mining. This is evidenced in the common mining terminology of proven ore, probable ore, and possible ore. From a geotechnical standpoint,...
Monitoring Saves a Site
A comparison is made of two supported excavations that were similarly designed and constructed. Both excavation support systems consisted of a soldier pile and lagging sheeting wall supported...
Rock Masses
Modeling of Underground Openings/Probability of Slope Failure/Fracture of Intact Rock
While soil mechanics has been the dominant interest of Civil Engineers since Karl Terzaghi's recognition of the principle of effective stress, rock mechanics is becoming increasingly...
Vibration Problems in Geotechnical Engineering
This volume constitutes the Proceedings of a two-session Symposium whose main objective is to address geotechnical issues related to vibration problems other than those associated with...
Slurry Walls Protect Harvard Square
Harvard Square Station, Cambridge, Mass., had to be rebuilt when Boston's Red Line Subway was extended further out to the suburbs. For the first time, tied back slurry walls...
Just a Few More Tests and We'll Be Sure
This short paper presents a practical approach to data analysis, with the intent of suggesting that simple statistical methods - when tailored to geotechnical problems - do in fact provide...
Characteristics of Indiana Soil Properties
The Indiana Geotechnical Data Bank was established to collect engineering soil data in the state and to provide information for engineering planning and design works. It contains nearly...
Geotechnical Perspective?Proposed Drilled Shaft Standard
In the writer's understanding, a standard is an agreed upon manual of practice and as such, sets the level of performance and attainment considered adequate. A standard is...
Geotechnically Allowable Stress for Driven Piles
There are opposing opinions on what value to use for allowable stress in driven steel piles. The key is that two types of stress must be considered: the structurally allowable stress,...
Geotech '84
The abstracts are to provide the reader with a summary of the presentations made at the Geotech III Conference. They also give the readers a reference for future use and the name and current...
In Search of Ancient Engineers
Many examples of pre-Columbian civil works have been uncovered in North and South America. Some reflect well-organized technologies comparable to those of the Old World of the same time...
Return to search